UK 5 N

https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, connection method: Screw connection, number of connections: 2, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 Your advantages  Universal foot which can be used on NS 35... and NS 32... DIN rails  The UK universal screw terminal block series has the typical features which are decisive for practical applications  Potential distribution via fixed bridges in the terminal center or insertion bridges in the clamping space Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918090760 Weight per Piece (excluding packing) 8.795 g Custom tariff number 85369010 Country of origin India Technical data General Note Other languages Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 4 mm² Color gray 09/09/2019   Page 1 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Technical data General Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.02 W Designation Level 1 above 1 below 1 Maximum load current 41 A (with 6 mm² conductor cross section) Nominal current IN 32 A Nominal voltage UN 800 V Open side panel Yes Shock protection test specification IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.2 mm² / 0.2 kg 4 mm² / 0.9 kg 2 6 mm / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.2 mm² Tractive force setpoint 10 N Conductor cross section tensile test 4 mm² Tractive force setpoint 60 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Result of tight fit on support Test passed Tight fit on carrier NS 32/NS 35 Setpoint 5N 09/09/2019   Page 2 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Technical data General Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted ASD level 1.857 (m/s ) /Hz Acceleration 0,8 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g (10-150-10 Hz) Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 09/09/2019   Page 3 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 6.2 mm End cover width 1.8 mm Length 42.5 mm Height NS 35/7,5 47 mm Height NS 35/15 54.5 mm Height NS 32 52 mm Connection data Connection method Screw connection Screw thread M3 Stripping length 8 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Cross section with insertion bridge, solid max. 4 mm² Cross section with insertion bridge, stranded max. 4 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, max. 09/09/2019   Page 4 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Technical data Connection data 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² Connection in acc. with standard IEC/EN 60079-7 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Internal cylindrical gage A4 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141100 09/09/2019   Page 5 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Classifications eCl@ss eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals DNV GL / CSA / RS / LR / KR / NK / UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / EAC Ex Approvals IECEx / ATEX / UL Recognized / cUL Recognized / GL / EAC Ex / cULus Recognized Approval details 09/09/2019   Page 6 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Approvals DNV GL    https://approvalfinder.dnvgl.com/  TAE00001CT CSA    http://www.csagroup.org/services-industries/product-listing/  13631     Nominal voltage UN 600 V Nominal current IN 30 A mm²/AWG/kcmil 28-10 RS    http://www.rs-head.spb.ru/en/index.php  17.00013.272 LR    http://www.lr.org/en  96/20013 KR    http://www.krs.co.kr/eng/main/main.aspx  HMB17372-EL001 NK    http://www.classnk.or.jp/hp/en/  09 ME 141 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 30-10 30-10 09/09/2019   Page 7 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Approvals KEMA-KEUR    http://www.dekra-certification.com     Nominal voltage UN 800 V mm²/AWG/kcmil 4 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A mm²/AWG/kcmil 30-10 30-10 IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 800 V mm²/AWG/kcmil 4 EAC    2183462.01    FILE E 60425  NL-26110  RU CDE.A*30.B.01742 Accessories Accessories Bridge Fixed bridge - FB-150 METER - 0201595 Cross connection rail, for fixed bridging of identical inputs and outputs, made of Cu, nickel-plated, 1 m long     Cover profile 09/09/2019   Page 8 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Cover - EA 5 - 1024014 Single covers, color: transparent     Cover - EA 5-WS - 1024085 Single covers, for covering one terminal block, with black symbol (lightning flash) snap fit, color: transparent/yellow     DIN rail DIN rail perforated - NS 32 PERF 2000MM - 1201002 DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015 DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     09/09/2019   Page 9 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     09/09/2019   Page 10 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     09/09/2019   Page 11 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     09/09/2019   Page 12 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     09/09/2019   Page 13 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-UK 4/10 - 3003020 End cover, length: 42.5 mm, width: 1.8 mm, height: 35.9 mm, color: gray     Insertion bridge Insertion bridge - EB 2- 6 - 0201155 Insertion bridge, pitch: 6.2 mm, number of positions: 2, color: gray     09/09/2019   Page 14 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Insertion bridge - EB 3- 6 - 0201142 Insertion bridge, pitch: 6.2 mm, number of positions: 3, color: gray     Insertion bridge - EB 10- 6 - 0201139 Insertion bridge, pitch: 6.2 mm, number of positions: 10, color: gray     Insulating sleeve Bridge bar isolator - IS-K 4 - 1302338 Bridge bar isolator, color: gray     Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     09/09/2019   Page 15 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Labeled terminal marker 09/09/2019   Page 16 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     09/09/2019   Page 17 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Marker for terminal blocks - ZB 6,LGS:U-N - 1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Mounting material Screw - ZSR - 2303608 Screw     Mounting clip - ZSR-EX - 0200017 Distance piece, metal, for branches of FB-150, with screw and thrust washer     09/09/2019   Page 18 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Partition plate Separating plate - TS-K - 1302215 Separating plate, length: 22 mm, width: 0.5 mm, height: 22 mm, color: gray     Partition plate - ATP-UK - 3003224 Partition plate, length: 56 mm, width: 1.5 mm, height: 45.7 mm, color: gray     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Screw bridge 09/09/2019   Page 19 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Step bracket - STL 10N/5N - 0204110 Step bracket, pitch: 5 mm, number of positions: 2, color: silver     Step bracket - STL 35/ 5 - 0204107 Step bracket, pitch: 5 mm, number of positions: 2, color: silver     Jumper - ISSBI 10- 6 - 0301505 Jumper, pitch: 6 mm, number of positions: 10, color: silver     Jumper - LB 10-6 BU - 0202280 Jumper, pitch: 6 mm, number of positions: 10, color: blue     Jumper - LB 10-6 GY - 0202358 Jumper, pitch: 6 mm, number of positions: 10, color: gray     09/09/2019   Page 20 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Jumper - LB 100-6 GY - 0202345 Jumper, pitch: 6 mm, number of positions: 100, color: gray     Jumper - LB 100-6 BU - 0202303 Jumper, number of positions: 100, color: blue     Chain bridge - KB- 6-EX - 0201485 Chain bridge, number of positions: 1, color: silver     Fixed bridge - FBI 2- 6 - 0203438 Fixed bridge, pitch: 6 mm, number of positions: 2, color: silver     Fixed bridge - FBI 10- 6 - 0203250 Fixed bridge, pitch: 6 mm, number of positions: 10, color: silver     09/09/2019   Page 21 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Fixed bridge - FB 3- 6-EX - 0201469 Fixed bridge, pitch: 6.2 mm, number of positions: 3, color: silver     Fixed bridge - FB 2- 6-EX - 0201456 Fixed bridge, pitch: 6.2 mm, number of positions: 2, color: silver     Fixed bridge - FB 5- 6 - 0201029 Fixed bridge, pitch: 6.2 mm, number of positions: 5, color: silver     Fixed bridge - FBI 100- 6 - 0201650 Fixed bridge, pitch: 6 mm, number of positions: 100, color: silver     Fixed bridge - FBI 20- 6 - 0201867 Fixed bridge, pitch: 6 mm, number of positions: 20, color: silver     09/09/2019   Page 22 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Fixed bridge - FB 10- 6-EX - 0201281 Fixed bridge, pitch: 6.2 mm, number of positions: 10, color: silver     Fixed bridge - FB 10- 6 - 0201184 Fixed bridge, pitch: 6.2 mm, number of positions: 10, color: silver     Jumper - LB 100-6 RD - 0202316 Jumper, number of positions: 100, color: red     Jumper - LB 10-6 RD - 0202293 Jumper, pitch: 6 mm, number of positions: 10, color: red     Screwdriver tools Screwdriver - SF-SL 0,6X3,5-100 S-VDE - 1212587 Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     09/09/2019   Page 23 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Short-circuit connector Short-circuit connector - KSS 6 - 0301547 Short-circuit connector, pitch: 6 mm, number of positions: 2, color: black     Short-circuit connector - KSS 3- 6 - 0309523 Short-circuit connector, pitch: 6 mm, number of positions: 3, color: black     Switching jumper Switching jumper - USBRJ 2-7 - 2305538 Switching jumper, number of positions: 2, color: silver     Switching jumper - USBR 2-7 - 2303239 Switching jumper, pitch: 7 mm, number of positions: 2, color: silver     Terminal marking 09/09/2019   Page 24 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Marker card - SBS 6:UNBEDRUCKT - 1007222 Marker card, Card, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: snap into tall marker groove, snap into flat marker groove, for terminal block width: 6 mm, lettering field size: 6 x 6.1 mm, Number of individual labels: 250     Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60     Test plug terminal block Test plugs - PS-UK 2,5 B/Z-6 - 3001239 Test plugs, color: red     09/09/2019   Page 25 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Test plugs - PS-UK 2,5 B/E - 3001132 Test plugs, color: red     Reducing plug - RPS - 0201647 Reducing plug, color: gray     Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Test socket Female test connector - PSBJ 3/13/4 - 0201304 Female test connector, color: silver     Female test connector - PSB 3/10/4 - 0601292 Female test connector, color: silver     09/09/2019   Page 26 / 27 https://www.phoenixcontact.com/us/products/3004362 Feed-through terminal block - UK 5 N - 3004362 Accessories Warning label printed Warning label - WS 3- 6 - 1004115 Warning plate, with 2 plastic screws, across 3 terminal blocks, pitch 6 mm     Warning label - WS 4- 6 - 1004209 Warning plate, with 2 plastic screws, across 4 terminal blocks, pitch 6 mm     Warning label - WS 5- 6 - 1004403 Warning plate, with 2 plastic screws, across 5 terminal blocks, pitch 6 mm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/09/2019   Page 27 / 27